FAQ
Common operations questions, organized by topic.
Hotel reservations
Why can't a subsequent linked reservation be checked in directly?
A subsequent linked reservation can only be checked in after the prior reservation has been checked out. The check-in dialog shows the Linked reservation condition. See Check in.
Can guests check in if room setup is not complete?
Yes. In the check-in dialog, click Still Check In; room setup tasks remain and can be completed later. See Check in and Add add-ons.
Why can't I perform a paid upgrade?
Common reasons: room already reserved, linked reservations exist, or banner conditions are not met (already upgraded, recommended room type has no availability, etc.). See Paid upgrade.
When can Quick Post be used?
Either condition is sufficient: the rate plan has Quick Post enabled; or the reservation is linked to a company with Auto Invoicing enabled and Billing Party set to Company. See Check out and Create hotel reservation.
What is the difference between Payment Link and POS Payment?
Payment Link is for online credit card collection via email (often used for overseas guarantees or in-stay top-ups). POS Payment is for on-site collection via a connected POS terminal at overseas properties; hotel and long-stay reservations share the same entry. See Card payments and POS payment.
Why can't I find New Transaction or POS Payment in Folio?
The reservation may be archived. After archiving, Unarchive first, then proceed. See Hotel transactions and pre-authorization.
Long-stay reservations
Why is the target room grayed out and cannot be selected?
For the remaining stay dates of the current reservation, the room has one of the following:
- Reserved by another reservation (reserved indicator shown)
- In unsellable status (OOO indicator shown)
Does the original room need cleaning after a room change?
Yes. The system automatically creates a check-out cleaning task for the original room.
Does DND status remain on the original room after a room change?
No. After a successful room change, the system clears DND on the original room. To set DND on the new room, the guest must do so again.
What if room change fails due to room status or occupancy?
The target room's status changed while you were working (another reservation may have taken it, or it was marked unsellable). Close the dialog, re-enter the room change flow, and select another available room.
Why is the Create Contract button grayed out?
Possible reasons:
- No occupants added.
- When creating a renewal contract, the prior contract status is invalid.
After clicking Create Contract, why does it say the user has no identity information?
An occupant has no ID document on file. Complete ID information for all occupants — via the mini program or manually in Console.
After clicking Create Contract, why does the system report the stay period is too long?
The total stay exceeds the 14-month limit (first contract). Adjust check-in or check-out dates so the period is within 14 months.
After clicking Create Contract, a popup says the user has not authorized personal information transfer — does this affect contract creation?
The occupant has not authorized personal information transfer, so a digital contract cannot be created. You can still create a manual contract only. For a digital contract, ask the occupant to log in to the mini program (My → Personal information management) and complete authorization.
When creating a contract, why is the Digital Contract option grayed out?
Possible reasons:
- The occupant has not completed personal information transfer authorization (same resolution as above).
- Party B is set to Company: when the signing party is a company, only manual contracts are supported.
Can checkout be extended after early termination?
If you need to extend checkout again after early termination, you can only do so within the final billing cycle — not across cycles.
Example: early termination moved the end date to July 1; the final billing cycle is June 8–July 8. To extend, the contract end date can only be July 2–July 8; July 9 and later are not available.
Group reservations
How do I change group arrival/departure dates?
On group detail Actualized / Block, open unified Edit Block, change arrival / departure at the top, confirm the block grid, then Confirm. After save, arrival and departure recalculate from the earliest / latest dates with block. Steps: Modify group dates and block.
Why can't I shorten the group dates?
Dates you remove that still have active group reservations cannot be removed until those reservations are cancelled. Night-audited arrival side cannot be shortened further.
What if Edit Block fails on confirm?
Fix the issue shown, then Confirm again:
- Night-audited: that day cannot change; original block is restored and greyed.
- Invalid quantity: block cannot be below pickup; added block cannot exceed available inventory.
- Total block is 0: keep at least one room night, or cancel the group.
- Rate plan mismatch: change plan or bring dates back into coverage.
- Reservations on removed dates: cancel those group reservations first.
Does adjusting allotment affect existing group reservations?
It does not cancel or rewrite existing reservations. The system will not lower block below pickup for a date/room type, and you must clear active reservations on dates you remove before shortening.
How do I view allotment adjustment history?
On the group detail Actualized / Block tab, click Block Ledger. All adjustments are listed with time, operator, and values.
What is room block used for?
- Lock inventory: when a group is created or block is edited, inventory is locked by block quantity; individual reservations cannot use that stock.
- Control room count: group reservations may only use remaining group block (block − pickup), so members keep rooms.
Why can't I select the target rate plan?
Confirm the rate plan is valid for the group stay dates:
- Active (enabled, validity covers the stay range).
- No blackout dates.
- Sellable.
Why does submission fail with an error?
Possible causes:
- Rate plan no longer applies: someone changed the rate plan (validity, room types, sellability) during creation.
- Insufficient inventory: other bookings consumed inventory during creation.
Can I create a group without creating reservations immediately?
Yes. Inventory is locked when the group is created; create reservations later as needed.
Do I need to enter the rooming list all at once?
No. You can enter in batches.
Can rooming list entries exceed allotted room nights?
No. Creating or changing dates on group reservations must stay within group dates and remaining block per date and room type. Increase block first via Modify group dates and block, then add or change reservations.
Can group reservations have their rate plan changed?
Yes. Before the first night audit, you can change the rate plan on an individual group reservation.
Do group reservations support rate changes and paid upgrades?
Rate changes are supported. Paid upgrades are not; the system errors with “group reservations do not support paid upgrade”. Upgrades would break block isolation and contracted rates by room type.
Do group reservations support linked reservations?
Yes — same mechanism as individual reservations (group–group and group–individual).
Dayuse reservations
How do I view Dayuse reservations for this property?
- Under Rooms → All Reservation, filter by Dayuse in search.
- Under Rooms → All Reservation, use the Dayuse quick filter.
Can Dayuse rooms still be booked late in the day?
At 16:00 each day the system zeros Dayuse sellable inventory. To book or create a Dayuse reservation, manually adjust inventory first.
Profiles
Why does company search return no results?
Check:
- Search text too short (letters ≥ 2, digits ≥ 4, CJK characters ≥ 1)
- Incorrect keyword (partial match, case-insensitive)
- Wrong Country/Region filter
How is reservation amount calculated in company profiles?
Total price of all non-cancelled reservations linked to the company, including hotel and long-stay.
What is a CRS agreement company? How is it different from company profiles?
Company profiles are the full company database; agreement companies are a subset confirmed for negotiated rate cooperation.
Why can't I create a company directly in agreement companies?
Agreement companies must be selected from existing company profiles. Create the company in company profiles first, then add it to the CRS agreement company list.
What if the original phone number or email cannot be used to log in to the App?
Click Reset to clear login methods and restore temporary login. After logging in again, add a new phone number or email.
Front desk workflow
Print folio fails with missing ID / document errors
Cause: guest ID document information is missing, so the folio cannot be printed.
Action: complete ID documents, then print again. See ID documents.
After App express check-out, the reservation is still Pending Check-out
About 15 minutes after express check-out, the reservation status automatically becomes Completed. See Express hotel check-out.
Cannot add notes on a completed reservation
The system does not support editing notes on completed reservations (after night audit on the check-out date). This is planned for later improvement.
Same-day check-in and check-out hotel reservations cannot be sold again
This matches current system behavior and is planned for later improvement.
Same-day check-in and check-out hotel reservations do not create a cleaning task
This matches current system behavior — manually create a dirty-room task. Planned for later improvement. See Vacant cleaning, Schedule cleaning.
Cannot mark no-show after midnight
No-show can be marked between 6:00 PM and midnight (and cancelled before night audit). After midnight, no-show cannot be marked (known issue pending fix).
Temporary workaround: cancel the reservation.
Cannot delete a guest ID document
Use the new user profile page (open via top search) to edit ID document information. See ID documents.
Who can sign an electronic contract?
- Mainland China guests: ID card, and the phone number and Alipay must be real-name verified to that ID card.
- Non-China guests: passport, and the phone number and Alipay must be real-name verified to that passport.
See Create user profile, Guest App login and e-contract.
How do I handle a long-stay room change?
- Permanent move (terminate old contract): early-terminate the original contract, check out, create a new reservation and resign the contract, then check in. Paid balances can be transferred from the previous reservation. To keep the same billing cycle, set the new contract bill day to the same day as the old contract.
- Temporary move for maintenance (1–2 nights): leave the long-stay reservation as is and create a separate hotel reservation for the guest.
For same/different room-type moves within a long-stay stay, see Long-stay change room.
Some staff do not receive new reservation alerts in Console
Email the Digital team with those employee accounts so they can configure the required permissions.
How do front desk work phones enable Staff App push notifications?
To be confirmed.
Access control and hardware
Access control (common area / face terminal) will not open
For a newly checked-in reservation, if the room door itself opens, try in order: restart the face terminal → restart the downstairs box → re-authorize.
Room door will not open
For a newly checked-in reservation, after ruling out low lock battery, try resetting the password or re-authorizing. If the lock is offline, send a temporary password first. See Check in.